DMU 65 monoBLOCK (Reference-Nr. 011135)

•  
  Referans numarası 011135

  Üretim Yılı 2023

  Çalışma Saati Uygulanabilir değil

• Satıcı

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  İşleme merkezleri

• Makine tipi

  İşleme merkezleri (üniversal)

• İmalatçı

  DMG MORI

• Kumanda

  Heidenhain

• Tanım

  
  

  General
  Universal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7
  Technical Data
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  Working area 1
  Longitudinal	735 mm
  Cross	650 mm
  Vertical	560 mm
  Tool changer
  Tool changer plane	vertical
  Type of gripper	Double gripper
  Number of tools	30
  Max. tool length	315 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	160 mm
  Floor space/Weight
  Weight approx.	14500 Kg

• Şartname

  
  

  NC swivel rotary table	Table surface Ø650 mm
  	Centre bore 32 mm
  	Maximum load (table centre) 600 Kg
  	Slot width 14 mm
  	Number of Slots 9
  	Distance between T-Slots 63 mm
  	Rotation speed max.4. Axis 40 rpm
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation Speed 5. Axis 20 rpm
  	5. Axes (swivelling range) +/- 120 degree
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Package Mill / Turn HSK-A 63	Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1
  Tool magazine, chain vert., 90 pockets	Tool magazine Vertical chain magazine basic with 90 tool pockets SK 40 or optional chosen spindle tapers
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Infrared measuring probe Heidenhain	Infrared measuring probe Type Heidenhain TS 460 SK 40 or optionally chosen spindle taper
  Tool breakage control mechanical	Tool breakage control mechanical version max. tool length 315 mm
  Tool measuring in machining area Blum Laser FD	Tool measuring in machining area Blum Laser DIGILOG Laser-system for milling tools, 3D touch-probe for turning tools
  Production package 40 bar/23 l/min, 600 l tank MT	Production package (M / T): belt chip conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar/23 l/min / 580 psi / 6 gpm through spindle centre (AD) Externa
  Rotating clear-view window	Rotating clear-view window cabin door
  Sensorpaket i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  rotoLENS - milling head camera	rotoLENS - Camera with rotating lens integrated in the milling head Visualization via CELOS and HDMI Digital zoom and recording function
  Mill-Turn Autom. Interface PH Cell 300/Twin SCHUNK	Mill-turn automation interface PH Cell 300 / PH Cell Twin for SCHUNK zero-point clamping system consisting of: - Interface (Profinet) via M65 - Working table with 4-channel mill-turn rotary transmission - Automatic lifting door - Control of SCHUNK (VERO
  Price reduction for automation from DMG MORI	Price reduction on automation interface with simultaneous order of a DMG MORI Automation solution
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Interface for Oil and emulsion mist separator	Interface mechanical and elektrical for oil- and emulsion mist separator
  Control cabinet lighting with power outlet	Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  PH CELL 300	PH Cell 300 pallet loading and unloading system with handling- and pallet rack system - Handling system with pallet gripping system, Transfer weight max. 300 kg / 660 lbs (pallet with load) - 1 shelf module with 3 shelf floors and up to 15 storage p
  Pallet Management - Control Comfort Plus	Control Comfort Plus includes additional to the basic version different options more, to ensure a better utilization and flexibility of the automation cell. - Zero point displacement of the pallets - Selection of multiple different NC-programs for one p
  Integration-Kit for DMU 65/75 mB 2nd Gen.	Integration-Kit for DMU 65/75 mB 2nd Gen with Profinet interface
  Set-up station rotable	Set-up station rotatable manual 4 x 90°
  Additional automation control panel	Additional automations control panel on the PH Cell set-up station
  SCHUNK VERO-S SSN turn zero point clamping station	SCHUNK VERO-S SSN turn-S zero point clamping station with 4 x SCHUNK VERO-S NSE 3 clamping modules for pallet size d400 mm and d500 mm / d15.7 in and 19.7 in Grid 170 mm / 6.69 in
  1st shelf 3 floors for storage 12 x 400 mm pallets	1st shelf module with 3 shelf floors to store up to 12 pieces of 400x400 or d400 mm pallets
  3 x Steel MT-pallet d400, T-slots, SCHUNK compatible	3 x Steel Mill Turn pallet d400 mm / d15.7 in incl. clamping pins compatible for clamping station SCHUNK VERO-S SSN turn-S T-slots surface incl. SCHUNK-pallet coupling for gripping by pallet handling device

• Eyalet

  Kullanılmış