DMV 60 (Reference-Nr. 051430)

•  
  Referans numarası 051430

  Üretim Yılı 2023

  Çalışma Saati Uygulanabilir değil

• Satıcı

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  İşleme merkezleri

• Makine tipi

  İşleme merkezleri (dikey)

• İmalatçı

  DMG MORI

• Kumanda

  Heidenhain

• Tanım

  
  

  General
  Vertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7
  Characteristics
  Table surface	900 x 600 mm
  Tool Magazine with	60 Positions
  Movement X / Y / Z	600/600/510 mm
  Rapid feed X / Y / Z	42/42/42 m/min

• Şartname

  
  

  Spindle speed range 20 to 12.000 rpm	Spindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872
  Direct measuring system X,Y,Z	Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
  Production Package 80 bar	Production Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - E
  Active cooling system	Active cooling system for selected mechanical components in order to increase machine thermal stability
  Air coolant internal (through spindle centre)	Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
  Special chip conveyor for thin chips	Special chip conveyor dedicated for thin chips. Integrated pump to transport coolant mixed with chips to the filtration unit. Tank capacity 110 l, prefilter fineness: 0,35 mm (sieve). Note: 1. Option only available with Production Package 40 bar or Produ
  Tropical Package	Tropical Package Option includes: - Active cooling unit for electrical cabinet - Chiller unit 3,3 kW for main drive Recommended from 35°C to max. 45°C environmental temperature
  Infrared touch Probe Heidenhain TS 460	Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipment
  Tool measuring device Heidenhain TT160	Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to this option direct measuring system is recommend
  Tool (Un-) loading (Heidenhain)	Tool (Un-) Loading through Magazine Door during AUTO Mode Option includes: - Tool magazine door - Automatic magazine shutter (instead of brushes) - Buttons for magazine rotation For HEIDENHAIN control
  Technology cycle MPC 2.0	Technology Cycle Machine Protection Control MPC 2.0 Technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. Machine protection by quick shutdown. For HEIDENHAIN control
  ATC (Application Tuning Cycle) / Heidenhain	Technology cycle ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy / surface / speed Operator can set the optimum cutting method simply by selecting either the time priority mode or accuracy priority mode ac

• Eyalet

  Kullanılmış