DMV 110 (Reference-Nr. 051414)

•  
  Referans numarası 051414

  Üretim Yılı 2023

  Çalışma Saati Uygulanabilir değil

• Satıcı

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  İşleme merkezleri

• Makine tipi

  İşleme merkezleri (dikey)

• İmalatçı

  DMG MORI

• Kumanda

  Siemens

• Tanım

  
  

  General
  Vertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch
  Characteristics
  Table surface	1400 x 600 mm
  Tool Magazine with	60 Positions
  Movement X / Y / Z	1100/600/510 mm
  Rapid feed X / Y / Z	30/30/30 m/min

• Şartname

  
  

  AC main drive	Spindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872
  Direct measuring system X,Y,Z	Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
  Tool clamping buttons on the headstock	Tool Clamping and Unclamping Buttons placed on the Headstock Cover
  Production Package 80 bar	Production Package 80 bar Option includes: - Internal coolant supply 80 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal -
  Roto clear with multilayer window	Roto Clear - view window with multilayer window with tempered glass
  Special chip conveyor for thin chips	Special chip conveyor dedicated for thin chips. Integrated pump to transport coolant mixed with chips to the filtration unit. Tank capacity 110 l, prefilter fineness: 0,35 mm (sieve). Note: 1. Option only available with Production Package 40 bar or P
  Laser measuring probe for tools	Laser Probe BLUM for tool length and diameter measurement Option includes: - Micro Compact NT F=140 probe for tool measurment - measuring cycles with tool breakage monitoring - calibration tool
  Infrared touch Probe Heidenhain TS 460	Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipment Note: Additionally to this option direct measuring system is recommended.
  Tool (Un-) loading	Tool (Un-) Loading through Magazine Door during AUTO Mode Option includes: - Tool magazine door - Automatic magazine shutter (instead of brushes) - Buttons for magazine rotation SIEMENS control
  10 Free M-Codes	10 Free M-Codes (M180-M189) for SIEMENS control

• Eyalet

  Kullanılmış