DMC 55 H duoBLOCK (Reference-Nr. 064117)

•  
  Referans numarası 064117

  Üretim Yılı 2010

  Çalışma Saati Uygulanabilir değil

• Satıcı

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  İşleme merkezleri

• Makine tipi

  İşleme merkezleri (yatay)

• İmalatçı

  DMG MORI

• Kumanda

  Siemens

• Tanım

  
  

  General
  Horizontal Machining Centre; Control: 3D Control Siemens 840D solutionline
  Working area 1
  Cross	600 mm
  Longitudinal	560 mm
  Vertical	600 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min

• Şartname

  
  

  Cabine	Full protection cabin
  Direct measuring system	Direct path measuring system
  NC rotary table with pallet carrier	NC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)
  Tool magazine, chain Vert., 60 pockets	Tool magazine Vertical chain magazine with 60 tool pockets SK 40 or optional chosen spindle tapers
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Maximum load (table centre) 500 Kg
  	Table surface 400 x 400 mm
  Motor spindle 18,000 rpm	Main drive: Integrated motor spindle incl. active cooling
  Spindle taper CAT 40	Spindle taper CAT 40 (incl. adaptation working spindle, tool changer and standard magazine)
  	Spindle taper CAT 40
  	Speed range - 18000 rpm
  	Torque (40% DC) 110 Nm
  	Torque (100% DC) 84 Nm
  	Drive power (40% DC) 34 kW
  	Drive power (100% DC) 28 kW
  Tool clamping ISO/DIS 7388/II type B	Tool clamping hydraulic/mechanical for draw bolt ISO/DIS 7388/II type B
  Production package 40 bar/23 l/min, 980 l tank	Production package Coolant unit 980 l / 259 gallon, paper band filter Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) roof chip rinsing 300 l/min / 80 gallon/min (theoretical pump performance) through jets with n
  Tool measuring in machining area Blum Laser NT-Hybrid	Tool measuring in machining area Type Blum Laser NT-Hybrid automatic retraction of the measuring unit in a protected housing tool length and tool diameter measuring in horizontal/vertical position
  Spray pistol with pump	Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance)
  Oil and emulsion mist separator	Oil and emulsion mist separator electrostat filter
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Laminated safety glass	Laminated safety glass for window in right cabin door
  Safety package for power failure	Safety package for power failure: Voltage control with fast deceleration trigger

• Eyalet

  Kullanılmış