Gear Honing Machine GLEASON-HURTH ZHF 150

•  
  Referans numarası 1113-6813

  Üretim Yılı 2005

  Çalışma Saati Uygulanabilir değil

• Satıcı

  HD Werkzeugmaschinenhandel GmbH
  Robert-Bosch-Straáe 1
  35460 Staufenberg

  Germany

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  Dişli kesme makineleri

• Makine tipi

  İnce dişli işleme

• İmalatçı

  GLEASON-HURTH

• Tanım

  workpiece diameter:63,5 mm
  centre distance:350 mm
  honing length max.:*** mm
  total power requirement:*** kW
  weight of the machine ca.:6 t
  dimensions of the machine ca.:2,70x2,30x2,60 m
  
  Technical data G0504
  
  working space
  Length of the clamping surface mm 1550
  Number of T-slots mm 2
  Width of the T-slots mm 18
  Distance between T-slots mm 180
  Center height (tailstocks) mm 350
  Swivel range of the fine wheel head (U-axis) degrees + 30 / -30
  Center distance - tailstock / fine wheel min./max. mm 120/225
  Input resolution (all NC axes) mm / degrees 0.001
  
  Delivery slide
  Movement range (= Z-axis travel) mm 105
  Input resolution mm 0.001
  
  
  tool
  Outside diameter min./max. mm 225/275
  Hole diameter mm 160
  Width mm 60
  
  workpiece
  Outside diameter min./max. mm 40-150
  Module min./max. mm 1.25-4.0
  Tooth width max. Mm 45
  
  weight
  Weight of the machine approx. Kg 5500
  
  Operating fluid requirements Cooling lubricant recommendation, see chap. 8th
  Hydraulic fluid HLP D 46 approx. Itr 100
  Speeds and feeds
  Tool speed (continuously adjustable) max. 1 / min 2000
  Feed rates
  Rapid traverse / feed Z direction up to m / min 2
  X direction up to m / min 2
  U-direction up to m / min 2
  V-direction up to m / min 2
  C3 direction max.degree / sec 12
  
  Electrical equipment
  Operating voltage V 400
  Control voltage / lighting voltage V DC / AC 24/230
  Frequency Hz 50
  Power requirement approx. KVA 27
  If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies.
  Motor data
  Servo drives: Nm 1 / min
  Tool drive C1 27.0 3000
  Workpiece drive C2 27.0 3000
  X-axis 20.0 3000
  Z-axis 20.0 3000
  U-axis 6.0 3000
  Vertical portal (V1 axis) 6.0 3000
  Portal horizontal (U1 axis)
  Gripper axis of rotation C3 5.0 3000
  Loading slide (X1 axis) 5.0 3000
  Three-phase motors: KW 1 / min
  Hydraulic motor 1.5 1410
  Central lubrication 0.07 2700
  Coolant pump 4 2840
  
  Hydraulic equipment
  Delivery rate Itr / min 21
  System pressure bar 50
  Clamping pressure for: headstock max. Bar 35
  Clamping tailstock min./max. bar 20
  
  ** Only available if required.
  Not all limit values ??can necessarily be reached at the same time.
  
  If several maximum values ??come together in a processing task, performance restrictions must be expected!
  We reserve the right to make changes to the specified constructions, dimensions and weights
  

• Eyalet

  Kullanılmış