ZMM C 10 T14

•  
  Referans numarası 1069-2355

  Çalışma Saati Uygulanabilir değil

• Satıcı

  HESSE + CO Maschinenfabrik GesmbH
  Industriezentrum NÖ-Süd, Straße 4 Objekt 8
  2351 Wiener Neudorf

  Austria

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  Torna Tezgahları

• Makine tipi

  Kurşun ve besleme vidalı tornalar

• İmalatçı

  ZMM

• Teknik veriler

  neu

  ca. 4 Monate ab Auftragse

  Bulgarien

  125740 €

  2502.23 €

  1020 mm

  2000 mm

  510 mm

  358 mm

  770 mm

  560 mm

  361 M

  12

  6,3 - 315 1/min

  152

  0.039 - 15 mm/U

  0.02 - 7.5 mm/U

  76

  0.5 - 150 mm

  60 - 1/5 Gänge/"

  0.125 - 37.5

  240 - 4/5

  505 mm

  270 mm

  105 mm

  6 MK

  225 mm

  18,5 kW

  6400 kg

• Tanım

  Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 155-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 155 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Eyalet

  Kullanılmış