Arama filtresi
Arama filtresi
Ürünler
Sağlayıcı
Kategoriler
Üretici firma
Ürünler ()
Perakendeciler ()
Yapmak ()

ZMM C 10 T12

Bu Makine hakkında bilgi iste
Asking price


  • Referans numarası Referans numarası 1069-2337
    Çalışma Saati Çalışma Saati Uygulanabilir değil
  • Satıcı

    HESSE + CO Maschinenfabrik GesmbH
    Industriezentrum NÖ-Süd, Straße 4 Objekt 8
    2351 Wiener Neudorf
    AustriaAustria
    Showroom Logo
  • Ana Kategori

    Metal işleme makineleri
  • Kategori

    Torna Tezgahları
  • Makine tipi

    Kurşun ve besleme vidalı tornalar
  • İmalatçı

    ZMM
  • Teknik veriler

    neu
    ca. 4 Monate ab Auftragse
    Bulgarien
    103160 €
    2052.88 €
    800 mm
    2000 mm
    400 mm
    315 mm
    560 mm
    560 mm
    318 M
    12
    8 - 400 1/min
    152
    0.039 - 15 mm/U
    0.02 - 7.5 mm/U
    76
    0.5 - 150 mm
    60 - 1/5 Gänge/"
    0.125 - 37.5
    240 - 4/5
    410 mm
    150 mm
    105 mm
    6 MK
    225 mm
    11 kW
    6100 kg
  • Tanım

    Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 155 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

    This ad was created with MODUL MWS - the software solution of LogoTech.
  • Eyalet

    Kullanılmış

Talep gönder

HESSE + CO Maschinenfabrik GesmbH şirketinden daha fazla makine

Load