Bevel Gear Grinding Machine GLEASON PHOENIX 200 HG

•  
  Referans numarası 1113-6304

  Üretim Yılı 1996

  Çalışma Saati Uygulanabilir değil

• Satıcı

  HD Werkzeugmaschinenhandel GmbH
  Robert-Bosch-Straáe 1
  35460 Staufenberg

  Germany

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  Dişli kesme makineleri

• Makine tipi

  Konik dişli işleme merkezleri

• İmalatçı

  GLEASON PHOENIX

• Tanım

  max. wheel diameter:215 mm
  gear width:40.65 mm
  Largest Speed Ratio:1:10
  x-axis:(horizontal) -152 to 102 mm
  y-axis:(vertical) -102 to 178 mm
  z-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mm
  b-axis:3 - 90 °
  max. distance machine center to spindle slide:115 mm
  max. nos. of teeth:5 - 200 ( inclusive ) St.
  workpiece external diameter max.:215 mm
  tooth profile - width x height:16 x 40,65 mm
  grinding wheel diameter:51 -190 mm
  grinding wheel turining speeds:1000 - 6000 1/min
  workpiece turning speeds:0 - 30 1/min
  workpiece spindle bore:konisch 3-29/32 "
  speed of axis:125 mm/sec.
  total power requirement:20 kW - 380 V - 50Hz kw
  weight of the machine ca.:10000 kos.
  dimensions of the machine ca.:4750 x 3400 x 2540 mm
  
  Model 200HG GLEASON Phoenix CNC Hypoid Spiral Bevel Gear Grinding Machine, Serial No. 914904, New 1996.
  Suitable for the hard finishing of spiral bevel, zerol bevel,and hypoid gears and pinions up to 8" (215.90mm) pitch diameter at 5:1 ratio, 1.6" (40.65mm) maximum face-width,
  utilizing non-dressable plated CBN wheels, or dressable wheels such as conventional aluminum oxide, SG, and/or vitrified CBN type .
  
  - Mhine furnished with free standing, air conditioned electrical enclosure, w/operator's controls located at machine front, adjacent to access door
  - GE-FANUC Series 150 Momputer Control , 10.4" LCD flat color display, storage capacity for 100 summaries, cycle fault monitoring, and automatic setup and control of 7 axes:
  (A ) Work Spindle, (B) Swinging Base, (C) Wheel Spindle, (D) Dresser, (X) Horizontal, (Y) Vertical, (Z) Sliding Base
  - Machine arrangement as 200HG Grinder
  - Manual stock dividing system
  - Wheel dressing unit (dressing cycle via cnc)
  - Totally enclosed work-area guarding w/powered
  access door
  - Work chamber lighting
  - Hydraulic work piece chucking with draw-rod
  - Flooded suction-type hydraulic unit
  Axes Speeds
  X-Horizontal 4.92"/Sec. (125mm/Sec.)
  Y-Vertical 4.92"/Sec. (125mm/Sec.)
  Z-Sliding Base 4.92"/Sec. (125mm/Sec.)
  A-Workspindle RPM...................... 0 to 30
  B-Sliding Base......................... 0 to 30 deg./sec.
  C-Wheel Spindle........................ 1000 to 6000 RPM
  D-Dresser Spindle...................... 1500 to 8000 RPM
  Root Angle Range (B-Axis).............. -5 deg. To 90 deg.
  Equivalent Root Angle Range............ -8 deg. To 90 deg.
  (Equivalent refers to cradle type machine)
  Full Depth (Maximum)................... .0.615" (16.00mm)
  Face Width (Maximum)................... .1.600" (40.65mm)
  Range of Tooth Numbers................. 5 to 200 inclusive
  Maximum Gear Pitch Diameter of Typical
  35° Spiral Angle Gear Using Maximum
  Wheel Diameter......................... 7.5" Diameter Wheel
  At the Following Ratios:
  1:1.................................... 6.75" (171.45mm)
  2:1.................................... 8.50" (215.90mm)
  5:1.................................... 8.50" (215.90mm)
  

• Eyalet

  Kullanılmış